FAQs
What are the key points for application, and how effective is the anti-slip effect?
Simple procedure: Ensure the tile surface is free of water before Brush anti-slip gel. Once application provides slip resistance for several years (3-5 year).
Important notice: Ensure uniformly application of the gel to avoid thick accumulation in certain areas. More gel doesn't necessarily enhance slip resistance; uniform coverage on the tile surface provides the same result regardless of thickness.
Flush Gel after brush gel 15 minutes?
Brush gel and wait for 15 minutes, flush gel timely.
Do not wait for too long!
It's not that the longer the gel coverage time, the better the effect 15 minutes are enough for the anti slip effect.
How much area one bottle gel can cover?
A bottle of AntiSlip Gel Cream 300g, can cover about 3m-5m square.
Is it environmentally friendly? Can infants and pregnant women use it?
Formaldehyde, benzene, xylene, as well as VOC levels, all meet China National Building Materials Testing Center environmental standards. It contains no harmful substances, pregnancy and baby friendly.
Is there a smell after brushing?
The product has no irritating odor, after brushing for 15 minutes, there is no odor and no residue after flush with water. Could be used with confidence.
After applying the AntiSlip Gel Cream, can the tile floor still be cleaned and cleaned normally?
After using the AntiSlip Gel Cream, the ground is cleaned normally without affecting the AntiSlip effect. The cleaner the ground is, the more obvious the AntiSlip effect is. The AntiSlip principle of the AntiSlip Gel Cream is that the polymer nanomaterials penetrate into the micro-pores of the tile enamel to form micro-suction cups, so as to achieve a long-lasting AntiSlip effect. It should be noted that because the shower gel or sweat dirt is not cleaned for a long time, the ground will form a layer of oil film, which affects the AntiSlip effect, so often keep the ground clean and AntiSlip effect will be more significant.
What kind of ground material is it suitable for?
Not suitable for sealed surfaces such as wooden flooring and floor coatings. It may cause a slight matte effect on highly glossy ceramic tile surfaces. It may also cause varying degrees of lightening or fading on dark-colored marble. If concerned about the matte effect or fading, a small test patch can be applied in an inconspicuous area before applying it to the entire surface, ensuring satisfaction.
Can the ground be used without launching?
Yes, it can be used, such as in kitchens, balconies, rural living rooms, or other areas without drainage where it's inconvenient to flush water. After applying the gel cream uniformly and waiting for 15 minutes, use a dry mop or cloth to remove the gel cleanly. Then, use a clean damp mop to wipe the surface several times until there is no more anti-slip gel cream residue.
Can I open a bottle and use it again?
Yes, the anti-slip gel is valid for 2 years. After applying the non-slip gel, clean the roller brush and seal the gel bottle with the bottle sealing cap. It can be reused many times the next time you need it.
Will anti-slip gel reduce tile life?
No, our polymer nano non-slip materials only penetrate the ceramic tile nano surface has no effect on the strength and life of the ceramic tile. Coated with anti-slip gel tile floor tiles will have a very weak visual effect, almost indistinguishable by the naked eye.